Bera Grass Fix Eco

Grass Fix Eco

SKU:
157758
Availability:
Special order item - please allow 1-2 weeks for delivery or pick up
$14.95
Width:
55 (cm)
Height:
5 (cm)
Depth:
38 (cm)
Adding to cart… The item has been added
Description
Quick Facts
Grass Stabilisation Pedestrian & Vehicle Use Permeable Surface Recycled & Recyclable

BERA Grass Fix Eco is a durable, permeable grass reinforcement system designed to create stable, trafficable grassed surfaces without sacrificing their natural appearance. Its interlocking honeycomb structure supports the ground beneath the grass, helping reduce rutting, soil movement and surface damage caused by foot and vehicle traffic.

Ideal for garden pathways, overflow parking, grassed access areas and landscaping projects, Grass Fix Eco allows water to penetrate the surface while providing a reinforced base for healthy grass growth. Manufactured from recycled high-density polyethylene, it offers a practical alternative to conventional hard paving where a green surface is preferred.

Key Benefits:
  • Reinforces Grassed Areas: Helps protect lawns against rutting, compaction and wear from traffic.
  • Natural Appearance: Allows grass to grow through the honeycomb structure for a green, landscaped finish.
  • Permeable Design: Allows rainwater to pass through the surface into the ground below.
  • Interlocking System: Connected sheets create a stable, continuous reinforcement layer.
  • Durable Construction: Designed to withstand outdoor conditions, including UV exposure and frost.
  • Sustainable Materials: Manufactured from recycled HDPE and fully recyclable.
Ideal For:
  • Grassed pathways and garden walkways
  • Residential overflow parking areas
  • Occasional vehicle access across lawns
  • Landscaped access routes and leisure areas
  • Reinforcing grassed areas subject to wear
Dimensions:
Specification Measurement
Length 550mm
Width 380mm
Overall Height 51mm
Coverage per Sheet Approx. 0.21m²
Weight per Sheet Approx. 0.9kg

Coverage: Allow approximately 4.8 sheets per square metre before accounting for cutting and wastage.

Additional Information:
Installation Guide

Correct ground preparation is essential for a stable, long-lasting grass reinforcement surface.

  1. Prepare the Foundation: Excavate to the required depth and prepare a compacted, free-draining crushed stone and gravel foundation. The supplier recommends a 200–400mm foundation, subject to the intended loading and site conditions.
  2. Prepare the Levelling Layer: Install a 50–70mm layer of mixed sand and crushed stone, levelling and compacting the surface. Provide suitable drainage and edge restraints.
  3. Lay the Sheets: Position the panels in a staggered pattern, connecting the interlocking edges. Allow approximately 50mm clearance at fixed boundaries for expansion.
  4. Secure the Surface: Lightly compact the installed sheets using a hand roller. Trim panels as required to fit edges and obstacles.
  5. Fill the Cells: Fill the honeycomb cells with a suitable grass-growing soil mix and water thoroughly to settle the material.
  6. Establish the Grass: Sow or establish suitable turf and water regularly until the grass is well established. Avoid heavy traffic during establishment.

Important: Foundation depth and construction requirements vary with soil conditions, drainage and expected traffic loads. Vehicle applications should be assessed and prepared accordingly.

Technical Specifications
  • Product: BERA Grass Fix Eco
  • Material: Recycled High-Density Polyethylene (HDPE)
  • Structure: Interlocking honeycomb cells
  • Sheet Dimensions: 550 × 380 × 51mm
  • Installed Coverage: Approximately 0.21m² per sheet
  • Weight: Approximately 0.9kg per sheet
  • Load Strength: Up to 170 tonnes/m² (empty panel, laboratory test)
  • Weather Resistance: UV and frost resistant
  • Recyclability: Fully recyclable

Load strength is a laboratory product rating, not a guarantee of the load capacity of an installed surface. Performance depends on the foundation, soil conditions and installation.

Care & Maintenance
  • Water regularly while grass is establishing.
  • Allow sufficient time for grass roots to establish before subjecting the area to traffic.
  • Mow as required, taking care not to damage young grass or expose the reinforcement cells.
  • Repair bare patches and maintain healthy grass coverage for the best appearance.
  • Inspect high-traffic areas periodically and top up soil or reseed where necessary.
Downloads & Installation Resources

For further technical information, ground preparation requirements and illustrated installation instructions, refer to the manufacturer's brochure.

Download Product Brochure & Installation Guide (PDF)

Frequently Asked Questions

Can Grass Fix Eco be driven on?

Yes. The system is designed for reinforced grassed surfaces, including suitable vehicle access and parking applications. The foundation must be prepared for the expected loading.

Will grass grow through the panels?

Yes. The honeycomb cells are filled with a suitable growing medium, allowing grass to establish within the reinforced surface.

Does it allow water to drain through?

Yes. The open-cell design allows rainwater to pass through the grassed surface, provided the underlying foundation is suitably permeable.

Can the sheets be cut to fit?

Yes. Panels can be trimmed to suit boundaries, corners and obstacles using suitable cutting tools.

How many sheets do I need?

Each sheet covers approximately 0.21m². Divide your total area in square metres by 0.21 and round up to the nearest whole sheet. Allow additional material for cuts and wastage.

Can it be installed directly over an existing lawn?

No. Proper excavation, foundation preparation and installation are required to provide a stable reinforced surface.