All ShapeScaper lengths are 2.4m long

Our Australian made BlueScope®, hot dipped Galvanised steel edging has a structural guarantee of 10 years, ensuring your confidence when purchasing and installing SHAPESCAPER® in your garden. Galvanised steel will appear shiny and spangled when first purchased, however after a year or so the shine will dull down to a matte grey, all though you will still be able to notice the spangled effect. Galvanised steel edging blends in very well, as grey is a neutral colour and doesn’t take the focus off the plants and lines of the garden, it creates flawlessly separated contrasts in your design.

To get the most out of your Galvanised steel edging be sure to pick up some cold galvanised spray paint to cover the areas you screw or cut as doing this during the installation exposes the inner metal which needs to be covered to protect the longevity of the edging. If you notice some surface rust from being nicked with the mower or whipper snipper we recommend using a wire brush to brush down the area, ensure it’s dry, and then coating the areas generously with your cold galvanised paint.

SHAPESCAPER® Galvanised steel garden edging is available in a range of heights: 75mm, 100mm, 150mm, 185mm, 230mm, 290mm, 390mm and 590mm. All lengths are 2400mm long and can be shaped on site into angled bends or flowing curves.

How to select your edging:

- Select the profile height required for your installation. 1/3 is buried in the ground, so if you want 300mm out of the ground you will needed a 390mm length
- Decided on the design of your gardens. Straight runs recommend 4 stakes per length, curved runs 3 per length. When selecting stakes, double the height of your selected profile is recommended.
- All joiners, screws and rivets required are included in your order

Below you will find some handy installation videos and guides